View cart “NOS7002 NFC Tag With Integrated Antenna” has been added to your cart.
Showing all 16 results
NOS10001 Arduino Modular IoT Shield
Rated 0 out of 5
0 Reviews- For +5V Arduino's
- Sensor Slots: 4
- I/O Interface Slots: 1
- For +5V Arduino's
- Sensor Slots: 4
- I/O Interface Slots: 1
NOS10002 Modular Raspberry Pi HAT+
Rated 0 out of 5
0 Reviews- For RaspberryPi 4/5
- 4 Sensors Slots and 1 Interface Slot
- Wide Selection of Sensors and Interfaces
- For RaspberryPi 4/5
- 4 Sensors Slots and 1 Interface Slot
- Wide Selection of Sensors and Interfaces
NOS7001 High-Precision, High-Accuracy Temperature Sensor
Rated 0 out of 5
0 Reviews- ±0.1 °C (maximum) from –20 °C to 50 °C
- 150-nA shutdown current
- Medical grade: meets ASTM E1112 and ISO 80601-2-56
- ±0.1 °C (maximum) from –20 °C to 50 °C
- 150-nA shutdown current
- Medical grade: meets ASTM E1112 and ISO 80601-2-56
NOS7002 NFC Tag With Integrated Antenna
Rated 0 out of 5
0 Reviews- 64-Kbit EEPROM
- Battery-less Operation
- Integrated & Tuned Antenna
- 64-Kbit EEPROM
- Battery-less Operation
- Integrated & Tuned Antenna
NOS7003 Environmental Sensor
Rated 0 out of 5
0 Reviews- Measures gas, humidity, pressure, and temperature
- High-accuracy and high-linearity sensor performance
- Low power consumption for energy-efficient operation
- Measures gas, humidity, pressure, and temperature
- High-accuracy and high-linearity sensor performance
- Low power consumption for energy-efficient operation
NOS8001 24-bit Load Cell Interface
Rated 0 out of 5
0 Reviews- 24-bit Precision Analog to Digital Converter
- Dual Channel
- Programmable Gain Amplifier
- 24-bit Precision Analog to Digital Converter
- Dual Channel
- Programmable Gain Amplifier
NOS8002 LoRa/LoRaWAN Interface
Rated 0 out of 5
0 Reviews- Worldwide Frequency Support
- Ultra-Low Power (1.69uA In Sleep)
- AT-Command Set
- Worldwide Frequency Support
- Ultra-Low Power (1.69uA In Sleep)
- AT-Command Set
NOS8003 16-Channel IO Expander
Rated 0 out of 5
0 Reviews- 16-Channels IO Expander
- Configurable Interrupts
- Bi-Directional Support
- 16-Channels IO Expander
- Configurable Interrupts
- Bi-Directional Support
NOS8005 RS485 Interface
Rated 0 out of 5
0 Reviews- Up to 500kbps
- 30kV ESD Protection
- +/- 15V Extended Common Mode Voltage
- Up to 500kbps
- 30kV ESD Protection
- +/- 15V Extended Common Mode Voltage
NOS8006 RS232 Interface
Rated 0 out of 5
0 Reviews- Up to 250kbps
- 30kV ESD Protection
- Compliant with TIA/EIA-232-F and ITU V.28 standards
- Up to 250kbps
- 30kV ESD Protection
- Compliant with TIA/EIA-232-F and ITU V.28 standards
NOS8007 Dual UART Interface
Rated 0 out of 5
0 Reviews- Dual full-duplex UART
- Sleep current less than 30 uA
- Baud rates up to 115200 bps
- Dual full-duplex UART
- Sleep current less than 30 uA
- Baud rates up to 115200 bps
NOS8008 Power Monitor
Rated 0 out of 5
0 Reviews- High-resolution, 20-bit Delta-Sigma ADC
- Measures as high as +85VDC @ 10A
- Low-burden 0.015 (15 milliohm), 0.1% shunt resistor
- High-resolution, 20-bit Delta-Sigma ADC
- Measures as high as +85VDC @ 10A
- Low-burden 0.015 (15 milliohm), 0.1% shunt resistor
NOS8009 CAN Bus Interface
Rated 0 out of 5
0 Reviews- Implements CAN2.0B (ISO11898-1)
- Up to 1 Mb/s data rate
- High ESD protection (23kV)
- Implements CAN2.0B (ISO11898-1)
- Up to 1 Mb/s data rate
- High ESD protection (23kV)
NOS8011 8-Channel 16-Bit ADC Interface
Rated 0 out of 5
0 Reviews- Eight single-ended or four differential inputs across both ADCs
- Programmable data rate: 8 SPS to 860 SPS
- Programmable gain amplifier
- Eight single-ended or four differential inputs across both ADCs
- Programmable data rate: 8 SPS to 860 SPS
- Programmable gain amplifier
NOS8013 Dual 4-20mA Interface
Rated 0 out of 5
0 Reviews- Built-in +12V power supply to external sensors
- High-precision ADC
- High-accuracy 0.1% shunt resistor
- Built-in +12V power supply to external sensors
- High-precision ADC
- High-accuracy 0.1% shunt resistor
NOS8014 Dual 0-5V Interface
Rated 0 out of 5
0 Reviews- Built-in +12V to power external sensors
- Highly accurate 0.1% shunt resistor
- High resolution of 62.5µV per LSB
- Built-in +12V to power external sensors
- Highly accurate 0.1% shunt resistor
- High resolution of 62.5µV per LSB